Furniture for Pace Center
Hi Dustin and Becky.
I know a sales rep for over 20 years that represents Arcadia and calorina
I reach out to him and see if we can set up an account with them
he told me probably not he said they don't over lap dealers with in the same area
they have around 4 big dealers selling their products located in the south/north/east bay.
If they open our account as a dealer you might want to see if there any items that would work to replace the Arcadia and Carolina items
if you must have them I could reach out to KBM I think they have access to Arcadia and Carolina.
I know a sales rep for over 20 years that represents Arcadia and calorina
I reach out to him and see if we can set up an account with them
he told me probably not he said they don't over lap dealers with in the same area
they have around 4 big dealers selling their products located in the south/north/east bay.
If they open our account as a dealer you might want to see if there any items that would work to replace the Arcadia and Carolina items
if you must have them I could reach out to KBM I think they have access to Arcadia and Carolina.
WE are now an authorized dealer for Kwalu
Cori Lounge Chair, Plinth Base
Dimensions: 30.00"W,28.00"D,33.00"H
LIST PRICE: $3,393
YOUR COST $,1545
Plus Shipping
Novara Chair
Dimensions: 23.50"W,24.75"D,32.00"H
LIST PRICE: $2,389
YOUR COST: 1,045
Plus Shipping
Alternative Furniture
For the think chair maybe this sit on it would work?
Shown with Gamut,Pewter by design tex. about $650 each
|
you have a steel case fabric Era Night Owl listed
|
|
|
Regarding the sit on it chair
The Freelance 4 leg is about $299 as shown.
Bleach cleanable and HHI compliant with Element Pebble by sit on it.
I did not see the The Carnegie Mustang 6208-5 on the sit on it website.
if that is the color you must have we would have to ask for a quote
from sit on it for custom materials.
The Freelance 4 leg is about $299 as shown.
Bleach cleanable and HHI compliant with Element Pebble by sit on it.
I did not see the The Carnegie Mustang 6208-5 on the sit on it website.
if that is the color you must have we would have to ask for a quote
from sit on it for custom materials.
|
For the nester table that one is a bit tricky to quote
Action Laminates will purchase the nester series mechanism from a back east manufacturer (Valley design.) and they will make the top size and laminated colors needed locally in Hayward. According to the manufacturer, the base is design for the following tops: Available for a 60” diameter,(not sure about a 48" Round but I will find out. square tops, 48”x 60” and 48” x 72”. The base alone is listed for $632 They only offer it in black color other colors have to be submitted for a qoute. |
 |
CONFERENCE TABLE;
I have talked to the shop that makes a lot of custom furniture for us and they are working on a price for the table.
HEIGHT ADJUSTABLE TABLE;
We can use HAT with (12 years warranty) or Friant (5 years) you have been using both so far.
I am waiting for the price for the custom laminate top surface.
here is ball park for now $650 per complete table
CABLE MANAGEMENT; $35-$40 Each for the same or there are other options under $30.00 Each
OFFICE MASTER CHAIR; $475 Each
I have talked to the shop that makes a lot of custom furniture for us and they are working on a price for the table.
HEIGHT ADJUSTABLE TABLE;
We can use HAT with (12 years warranty) or Friant (5 years) you have been using both so far.
I am waiting for the price for the custom laminate top surface.
here is ball park for now $650 per complete table
CABLE MANAGEMENT; $35-$40 Each for the same or there are other options under $30.00 Each
OFFICE MASTER CHAIR; $475 Each
ALTERNATIVE FURNITURE
HEIGHT ADJUSTABLE TABLE;
We can use HAT with (12 years warranty) or Friant (5 years) you have been using both so far.
I am waiting for the price for the custom laminate top surface.
here is ball park for now $650 per complete table
CABLE MANAGEMENT; $35-$40 Each for the same or there are other options under $30.00 Each
RETURN TABLE; We can use Silver powder coated T legs (waiting for the tops cost)
OFFICE MASTER CHAIR; $475 Each
We can use HAT with (12 years warranty) or Friant (5 years) you have been using both so far.
I am waiting for the price for the custom laminate top surface.
here is ball park for now $650 per complete table
CABLE MANAGEMENT; $35-$40 Each for the same or there are other options under $30.00 Each
RETURN TABLE; We can use Silver powder coated T legs (waiting for the tops cost)
OFFICE MASTER CHAIR; $475 Each
STORAGE
36" Lateral file silver $425 Each (there was a price increase on April 1srt)
2 drawer Moblie file $230 Each
SIDE CHAIR; We have no access to new Steel case chairs, However depending on the final count
we might be able to outsource some pre-owned but real clan that we would re-upholster
I look around and AMQ/Friant or Office Master don't have a similar chair with arms
Sit on it will be closest with the Rio chair but they don't offer the chair with arms.
but the Lumin 4 leg chairs does YOUR COST: $285 Each.
OFFICE MASTER CHAIR; $475 Each
36" Lateral file silver $425 Each (there was a price increase on April 1srt)
2 drawer Moblie file $230 Each
SIDE CHAIR; We have no access to new Steel case chairs, However depending on the final count
we might be able to outsource some pre-owned but real clan that we would re-upholster
I look around and AMQ/Friant or Office Master don't have a similar chair with arms
Sit on it will be closest with the Rio chair but they don't offer the chair with arms.
but the Lumin 4 leg chairs does YOUR COST: $285 Each.
OFFICE MASTER CHAIR; $475 Each
SIT ON IT CHAIRS
Rio 4 leg; $239 Each
Aviera Metal Guest Chair; $650 Each (Heavy duty 24" seat)
NOVO Cubicles by Friant;$2900-$3150 each depending on the size and hight of the panels.
This is for the average per cubicle fully loaded
With an adjustable table/cable management/lateral file/credenza top/desk mounted power/Duplexes/base feeds etc...
Rio 4 leg; $239 Each
Aviera Metal Guest Chair; $650 Each (Heavy duty 24" seat)
NOVO Cubicles by Friant;$2900-$3150 each depending on the size and hight of the panels.
This is for the average per cubicle fully loaded
With an adjustable table/cable management/lateral file/credenza top/desk mounted power/Duplexes/base feeds etc...
For these we don't have an account with Davis but I you must have this style (the table above is side table) I believe the Q6 series offer a 36"x60"
for these since is only (6) move chairs I can located them and get them re-upholstered I will need to find out how much unless you use the Sit on it Lumin.
for these since is only (6) move chairs I can located them and get them re-upholstered I will need to find out how much unless you use the Sit on it Lumin.
HERE ARE SOME RANDOM PICTURES OF TABLES WE SOLD
